03.08.2010 rlt635_100gpd.doc 1 of 3 rlt635-100gpd technical data high power visible laser diode features ? lasing mode structure: multi mode ? peak wavelength : typ. 635 nm ? optical ouput power: 100 mw ? package: 9 mm ? with monitor pd electrical connection pin configuration bottom view n-type pin function 1 ld cathode 2 ld anode, pd cathode 3 pd anode absolute maximum ratings (t c =20c) item symbol value unit cw output power p o 100 mw operating case temperature t c -20 ? +25 c storage temperature t stg -40 ? +85 c specifications (t c =20c) item symbol min. typ. max. unit optical specifications cw output power p o - 100 - mw center wavelength c 625 635 645 nm spectral width (fwhm) ? - - 3 nm wavelength temperature coefficient ? / ? t - 0.3 - nm/c U - 10 - deg fwhm beam divergence - 40 - deg emitting aperature w x h 100 x 1 m polarization te lifetime 3000 - - hour electrical specifications threshold current i th - - 500 ma operating current i op - - 700 ma slope efficiency 0.5 - - w/a operating voltage u op - - 2.5 v series resistance r d - 0.8 - ? the above specifications are for reference pu rpose only and subjected to change without prior notice.
03.08.2010 rlt635_100gpd.doc 2 of 3 package dimensons 9 mm package ( unit:mm )
03.08.2010 rlt635_100gpd.doc 3 of 3 safety of laser light ? laser light can damage the human eyes and skin. do not expose the eye or skin directly to any laser light and/or through optical lens. when handling the lds, wear appropriate safety glasses to prevent laser light, even any reflections from entering to the eye. focused laser beam through optical instruments will increase the chance of eye hazard. cautions 1. operating methode ? this ld shall change its forward voltage requirement and optical ouput power according to temperature change. also, the ld will require more operation current to maintain same ouput power as it degrades. in order to maintain output power, use of apc (automatic power control) is recommended. which use monitor feedback to adjust the operation current. ? confirm that electrical spike current generated by switching on and off does not exceed the maximum operating current level specified herein above as absolute maximum rating. also, employ appropriat countermeasures to reduce chattering and/or overshooting in the circuit. 2. static electricity ? static electricity or electrical surges will reduce and degrade the reliability of the lds. it is recommended to use a wrist trap or anti-el ectrostatic glove when handeling the product. 3. absolute maximum rating ? active layer of lds shall have high current density and generate high electric field during its operation. in order to prevent excessive damage, the ld must be operated striclty below absolute maximum rating.
|
